hotComm User Guide

User Guide
Document number: hc.70
© 2024 1stWorks Corporation. All rights reserved.

Audio is described in these topics:

Voice-quality Music or Radio

To play Internet FM Radio or voice-quality music in a hotComm room:

Set hotComm controls

Setting	Select this ...
Auto-Select	Uncheck Auto-Select.
Source	Select Microphone.
Quality	Set Quality to one of the Voice quality settings (1-4). We recommend selecting 3 or 4 unless you have low bandwidth users in the room. Note that the actual Quality level is determined automatically by the maximum quality set in the room profile on the server, and by the lowest quality setting of anyone who has their mic turned on.

Set audio controls
1. Click Audio Record Controls.
2. In the Recording Control window, check the Select box for your Wave Out Mix column, or the equivalent Out Mix column for your computer.
  
  If you do not see an Out Mix column, select Properties (or Options and then Properties) and check the appropriate Out Mix option. This adds it to the columns shown in your Recording Control window.
3. Close the Recording Control window.
In the VoIP Setting window, click Apply and then Ok. We recommend that you then close hotComm, wait 20 seconds, and restart it, but that may not be necessary.
Start playing the audio source (Internet FM radio, Windows Media Player, etc.) on your computer. When you want to start playing it into the room, turn on your hotComm mic by left-clicking the mic icon.