Use the Selections Toolbox to select color, line width and other characteristics of the mark-up.
| Option |
Description |
| Color |
To select a color, click a color button.
|
| Size
|
To select a line width and font size, either:
 |
Click the arrows |
| or |
 |
Select a size button. |
The Size affects both Solid and Text.
|
Solid
|
To draw solid lines, click the Solid button. Then, position your cursor on the spot where you want to start the line and drag to the end of the line.
| Line |
Action |
Example |
| Freeform line |
Left-click, and move your mouse. |
|
Straight line |
Right-click, and move your mouse. The straight line follows your mouse as the radius of a circle. Note: the radius appears black until you release the mouse. |
|
|
Text or Nametag
|
| Text |
To enter text, click the Text button. Position your cursor on the spot where you want to start the text, and type. |
| Nametag |
To add a name tag, click the Text button, position your cursor on a spot, and right-click. Your hotComm Display name appears. |
 |
|
Pointer
|
| To use a pointer, click the pointer button. The pointer displays the selected color and your hotComm Display name. |
 |
|
Rectangle or Frame
|
To create a rectangle or a frame, click the Rectangle button.
For a solid rectangle, also click the Solid button.
For the selected color, use a left-click mouse action. For the opposite color, use a right-click mouse action.
For example:
| Example color |
Solid button |
Mouse Action |
Result |
| Selected color is Yellow (the opposite to yellow is blue). |
Up
|
Left-click and drag |
Rectangle outlined in selected color |
 |
| Right-click and drag |
Rectangle outlined in opposite color |
 |
Down
|
Left-click and drag |
Solid rectangle in selected color |
 |
| Right-click and drag |
Solid rectangle in selected color outlined in opposite color |
 |
|
Reset
|
To clear the mark-up, select Reset from the Collaboration menu, or click the CLR button in the Selections toolbox. |
Undo
|
To back up one drawing action, select Undo from the Collaboration menu, or click the Back arrow button in the Selections toolbox. |
