How to Setup a Room
If you need additional assistance just click on the 1st Works Support Icon at www.1stWorks.com.

Steps	Directions	Result	Suggestions
Decide what Room name and password you would like to use and determine the approximate number of attendees that will be using the room for a meeting.	Contact your 1stWorks sales or support representative with this information. A Host name and Room name will be provided to you. Your password will be set by 1stWorks.	None	Pick a room name that represents it's main purpose e.g. Sales Operations Management
Go to the System Requirements page on the 1stWorks web site.	Click this link for direct access or go to the try/buy tab on our home web page.	Please check with your internal PC support person if you need assistance in determining whether your PC is configured for hotComm.	Most PC's will work with hotComm. Internet connection speeds will determine the performance of your session.
Click on the Connectibility Test link to determine if your PC has Internet ports available for hotComm.	Click this link for direct access or go to the try/buy tab on our home web page.	Please check with your internal PC support person if you need assistance in determining whether you have the required outbound access.	hotComm can function in several modes.  However, if your outbound Internet ports are blocked, hotComm will not work.
Copy and read the installation instructions located on our web site.	Click this link for direct access or go to the try/buy tab on our home web page.	None	None
Download a trial version for our web site.	Click this link for direct access or go to the try/buy tab on our home web page. hotComm Lite is about halfway down.	You will need to enter your email address for registration purposes.  A Test Room connection is preloaded to allow testing the audio quality of your PC speakers.	If you have difficulty in hearing the audio messages, please refer to the instructions in the upper chat window.